Description
Text 443-910-3857 or email hello@sinceregear.com with your VIN to confirm fitment before ordering.
Ford / Lincoln 6F55 Remanufactured 6-Speed Automatic Transmission
Vehicle Fitment
The chart lists Ford and Lincoln vehicles that came with a 6F55 in the configurations shown. Sincere Gear uses your VIN and original transmission tag number to confirm the correct assembly for your vehicle.
|
Vehicle |
Model years |
Engine and drivetrain |
|
Ford Taurus SHO |
2010–2019 |
3.5L EcoBoost AWD |
|
Ford Flex |
2010–2019 |
3.5L EcoBoost AWD |
|
Ford Explorer Sport |
2013–2019 |
3.5L EcoBoost AWD |
|
Ford Explorer Platinum |
2016–2019 |
3.5L EcoBoost AWD |
|
Ford Edge Sport |
2015–2018 |
2.7L EcoBoost AWD |
|
Ford Fusion Sport |
2017–2019 |
2.7L EcoBoost AWD |
|
Ford Police Interceptor Sedan and Utility |
2013–2019 |
Select configurations, including 3.5L EcoBoost AWD |
|
Lincoln MKS |
2010–2016 |
3.5L EcoBoost AWD |
|
Lincoln MKT |
2010–2019 |
3.5L EcoBoost AWD, including the 2014 model |
|
Lincoln MKX |
2016–2018 |
2.7L twin-turbo AWD |
|
Lincoln MKZ |
2017–2020 |
3.0L twin-turbo AWD |
|
Lincoln Continental |
2017–2020 |
3.0L twin-turbo AWD |
The 6F55 family includes multiple assemblies. Fitment depends on the original transmission tag number, final-drive ratio, drivetrain, production date, and calibration. If you have a photo of the transmission tag, send it with your VIN.
How We Remanufacture the 6F55
Sincere Gear remanufactures the 6F55 to restore clutch operation, hydraulic pressure, and shift quality. Each unit goes through the following steps:
- Complete teardown and inspection. We disassemble the transmission and inspect the case, clutch drums, planetary gears, shafts, bearings, and differential for wear, scoring, and heat damage.
- Cleaning and preparation. We remove clutch material, metal debris, and other contamination from the housing and internal components. We also inspect hydraulic passages and sealing surfaces.
- Clutch and seal rebuild. We renew friction plates, steel plates, sealing rings, gaskets, and internal seals as required by the rebuild specification. We inspect pistons and bushings and verify clutch-pack clearances during assembly.
- Valve body and hydraulic inspection. We inspect the valve body, solenoids, oil pump, and hydraulic control components. We service or replace components as needed to restore hydraulic operation and shift control.
- Reassembly and quality control. We follow assembly-specific torque and clearance requirements, check clutch circuits and sealing integrity, and perform applicable quality-control testing before shipment.
Warranty Coverage
- Standard warranty covers 1 year or 12,000 miles, whichever comes first.
- Optional extended warranty covers 3 years or 36,000 miles, whichever comes first, for an additional $500.
Coverage is subject to the installation and maintenance requirements, exclusions, and complete warranty terms provided at purchase.
Installation Requirements
Professional installation is strongly recommended. Use the specified MERCON LV automatic transmission fluid. Inspect and properly flush or replace the transmission cooling components before installation. Complete the required programming and adaptive relearn procedures with compatible diagnostic equipment, and follow the installation and break-in instructions supplied with your order.
Warranty Information